SINGLE HDMI INPUT FOXTEL® APPROVED MODULATOR AUDIO OUT - ZYCAST
HDMI TO DIGITAL RF HD DVB-T MODULATOR WITH AUDIO OUT
KT-FX1DA audio output via RCA to distribute to a PA amplifier with adjustable lip-sync if required. Ideal solution for pub and club installations.
The KT-FX1DA is a Foxtel® approved single input (HDMI) HD digital modulator that encodes Full-HD 1080p HDMI signal to any Australian DTV channel. Pre-programmed with Foxtel® approved channel listings. Frequency range of 177.5MHz to 816.5MHz (CH6 to CH69). Output level of 90dB and MER of >38dB. Video compression is via H.264 AVC (MPEG-4) and audio compression via MPEG Layer II/AAC to distribute a crystal-clear Foxtel® over new or existing coaxial cable. In addition, the KT-FX1DA allows the modulator source audio (output via RCA) to distribute to a PA amplifier. This audio has adjustable timing for matching the latency delay of the HD picture. This makes ZyCast the ideal solution for pub and club installations. Programming of the KT-FX1DA is done via a web GUI and front LCD panel.
Foxtel Approved Number: F31060
INPUT
Number of Inputs: 1
Video Input: HDMI
Video Input Level: 0.7 - 1.4V (Peak to Peak)
Video Mode: PAL
Audio Mode: Stereo
OUTPUT
Frequency Range: 177.5 MHz to 816.5 MHz (6 to 69)
HDMI Loop through: Yes
Output Level: 85dB
MER: >35dB
DELAYED AUDIO
Delayed Audio Output: Yes
Delay: 0 to 20 Seconds
Connection Type: RCA / Stereo
MODULATION
Video Resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Video Compression: H.264 AVC (MPEG-4)
Audio Compression: MPEG Layer II / AAC
Video bitrateSD: 1 Mbps to 9 Mbps (Default 5 Mbps)
Video bitrateHD: 12 Mbps to 24 Mbps (Default 24 Mbps)
LCN: AU (APN)
Carrier: 2K / 8K
GI: 1/32
FEC: 7/8
Constellations: 16 QAM / 64 QAM
MANAGEMENT / PROGRAMMING
Front LCD: Yes
Web GUI: Yes
GENERAL
Power Supply Type: External
Power Supply: 12V DC 1.5A
Redundant PSU: No
Operating Temperature: 0c to +45c
Storage Temperature: -0c to +60c
Dimensions: 236mm x 145mm x 34mm
Weight: 1.05 Kg
Warranty: 3 Years
